openclose
Opening Hours

Monday - Friday
08:00–12:00 & 13:00–17:00

Outside the opening hours only with appointment

info@betonform.it
+39 0474 504 180

Concrete chute

4a8b679df8.jpg 1f67632a1c.gif

Concrete chute type Betonform made of high-quality, armoured and vibrated concrete with the following quality requirements: medium concrete compressive strength 50 N/mm2 (500 kg/cm2), flexural strength, breaking load 12500 N (1250 kg). Water impermeability: maximum water penetration depth at the surface: 12 mm according to DIN standard 1048 (frost resistance).

Surface in exposed aggregate concrete or sanded according to the Betonform colour table. The inner concave portion of the chute has the dimensions 30x100x3 cm, is smooth and can be finished with transverse incisions for water drainage.

Dimensions and characteristics:
Lenght Width Strength
cm cm cm
100 50 11
100 30 12
back
Request

Floor slabs

102-0235_IMG.jpg 75f3376b9e.jpg 2264784323.gif

Slabs Type Betonform, square, made of high quality, vibrated and pressed concrete with the following quality requirements: medium concrete compressive strength 50 N/mm2 (500 kg / cm 2), bending strength (plate 50 x 50 x 5 cm), breaking load 12500 N (1250 kg). Water impermeability: maximum water penetration depth at the surface: 12 mm according to DIN standard 1048 (frost resistance).
Surface in exposed aggregate concrete or sanded according to the Betonform colour table. The structure of the slabs consists of two layers: an outer layer of 15 mm - the granulometry depends on the desired surface - and a second layer, a mixture of sand, gravel and cement in 1-15 mm particle size.

Dimensions and characteristics:
Side Side Strength Weight
cm cm cm kg/mq
50 50 4 94 ca.
50 50 5 115 ca.
back
Request