openclose
Opening Hours

Monday - Friday 08 a.m. – 12 o'clock & 1 p.m. – 5 p.m.

info@betonform.it
+39 0474 504 180

Papillon

DSC04187_1_.jpg DSCN0031.jpg DSC_7256.jpg Papillon-bild-1.jpg d39cb29a36.jpg 642cd3d955.jpg

Applications
Gardens, parks and promenades in today's urban planning have an important dual function. They function as zones of peace and recreation in the municipal areas of our cities. In addition to these more visual tasks, their function as places of recreation and relaxation is becoming more and more important. These considerations were the basis for the creation of Papillon.
A garden stone, which combines high functionality with formal concision. For architects and environmental designers, it is thus the ideal element with an almost inexhaustible variety of design possibilities.

Specification
Supply and installation of x-shaped precast concrete elements type Papillon, with following dimensions: 40 x 40 cm length 50 cm. The edges are bevelled, 1 x 1 cm. The elements are in board marked, gray (other colours on request) concrete and have the following values: medium concrete compressive strength 40 N / mm (400 kg/cm2). Water impermeability: maximum water penetration depth at the surface: 17 mm according to DIN standard 1048 (frost resistance).
The installation must be done professionally and according to the information provided by the manufacturer (depending on the use). As end section, a cube measuring 40 x 40 x 40 cm is used.

Dimensions and characteristics:
Height Width Lenght Weight
cm cm cm kg/Piece
40 40 50 100 ca.

 

Papillon 30°

Specification
Supply and installation of x-shaped precast concrete elements type Papillon 30° with following dimensions: 40 x 40 cm 30°. The edges are bevelled, 1 x 1 cm. The elements are in board marked, gray (other colours on request) concrete and have the following values: medium concrete compressive strength 40 N / mm (400 kg/cm2). Water impermeability: maximum water penetration depth at the surface: 17 mm according to DIN standard 1048 (frost resistance). The installation must be done professionally and according to the information provided by the manufacturer (depending on the use).

1 cam element = deviation of 30 °

3 cam segments = rounded corner 90 °

Dimensions and characteristics:
Height Width Lenght Weight
cm cm cm kg/Piece
40 40 - 85 ca.
back
Request